A47 -
Automotive Test Equipment: This three
part series begins by featuring the use of the
scan tool interfacing with the vehicle's
computer, and explains on-board diagnostic
systems. The use of the oscilloscope and its
capabilities is highlighted and meters and
break-out boxes are examined. Part 2 also
explains the advantages of using an I-BOB.
Finally, the use of a portable exhaust gas
analyzer is illustrated and the use of a motor
vac fuel system tester is demonstrated.
3
Part VHS Series w/ Study Guide...........$229.00
Order
copies.
Order now
ISBN#: 0-8064-1487-1
A46 -
Automotive Safety Systems Explained:
This series details the operation and function of
active, passive and inflatable safety restraint
systems. Servicing inflatable restraint systems
is also presented.
4 Part VHS
Series w/ Study Guide...........$289.00
Order
copies.
Order now
ISBN#:
0-8064-0468-X
A40 - Working
Safely In The Auto Shop: This series
covers general safety practices, emphasizes
proper dress and clothing, demonstrates safety
precautions for working safely under the car and
on various automotive systems. The proper
handling of hazardous waste is also discussed.
4 Part VHS
Series w. Study Guide...........$289.00
Order
copies.
Order now
ISBN#:
0-8064-1294-1
Both
Video and MPEG CD-ROM..............$389.00
Order
copies.
Order now
A45 -
Troubleshooting Antilock Brake Systems:
This series covers ABS similarities and
differences, presents ABS safety precautions and
teaches maintenance and basic diagnostic
techniques. Sample work orders are also shown.
4 Part VHS
Series w/ Study Guide...........$289.00
Order
copies.
Order now
ISBN#:
0-8064-0463-9
Both
Video and MPEG CD-ROM..............$389.00
Order
copies.
Order now
A38 - Auto
Emission Explained: This series defines
what emissions are and how they affect the
environment. Mechanical and electrical emission
control devices are presented and troubleshooting
techniques are provided.
4 Part VHS
Series w/ Study Guide...........$289.00
Order
copies.
Order now
ISBN#:
0-8064-0016-1
Both
Video and MPEG CD-ROM..............$389.00
Order
copies.
Order now
A42 -
Automotive Air Conditioning Systems Explained:
This series covers basic air conditioning
principles such as heat transfer and the
refrigeration cycle. Systems component and system
controls are defined as well as the servicing of
the air conditioning system.
4 Part VHS
Series w/ Study Guide...........$289.00
Order
copies.
Order now
ISBN#:
0-8064-0321-7
Both
Video and MPEG CD-ROM..............$389.00
Order
copies.
Order now
A44 -
Advanced Fuel Injection Systems: This
series explains the various injection systems
including PFI, SFI and CMPFI. Comparisons are
made between Open-Loop and Closed-Loop operation
and diagnostic case studies of various models are
featured.
3 Part VHS
Series w/ Study Guide...........$229.00
Order
copies.
Order now
ISBN#:
0-8064-0271-7
Both
Video and MPEG CD-ROM..............$329.00
Order
copies.
Order now
A39 -
Automotive Suspension Systems: This
series describes the different frame types and
tire types and their relation to the car
suspension system. It explains wheel dimensioning
including wheel diameter, rim diameter and rim
width. The various suspension systems are
presented as well as the various steering systems
and their function. The importance of steering
angles is also covered.
4 Part VHS
Series w/ Study Guide...........$289.00
Order
copies.
Order now
ISBN#:
0-8064-0352-7
Both
Video and MPEG CD-ROM..............$389.00
Order
copies.
Order now
A26 -
Electricity For Auto Technicians: This
series explains conventional and electron
theories and details the operation of the
electrical system. Practical uses of various
testing equipment is presented and electrical
diagnostic techniques are presented
5 Part VHS
Series w/ Study Guide...........$369.00
Order
copies.
Order now
ISBN#:
0-8064-0658-5
Both
Video and MPEG CD-ROM...............$469.00
Order
copies.
Order now
A30 -
Electronics For Auto Technicians: In
this series, the function of resistors,
inductors, capacitors, semiconductors and
transistors are presented. A comprehensive
description of how integrated circuits are used
in the automobile.
5 Part VHS
Series w/ Study Guide...........$369.00
Order
copies.
Order now
ISBN#:
0-8064-0844-1
A23 -
Distributorless Ignition Explained: This
series introduces the point type ignition system
and highlights its operation. The fundamentals of
electronic ignition are presented and an
explanation of the computer's role in electronic
spark timing is covered. Procedures for
troubleshooting are also discussed.
5 Part VHS
Series w/ Study Guide...........$369.00
Order
copies.
Order now
ISBN#:
0-8064-1520-7
A27 - The
Automotive Computer: This series
explains the role of the computer in modern
automobiles. A detailed look at sensors including
the MAF and the O2 are provided. Explanations of
the operation of actuators are given, as well as
an in-depth look at how the computer processes
data it receives. Troubleshooting techniques are
also covered.
4 Part VHS
Series w/ Study Guide...........$289.00
Order
copies.
Order now
ISBN#:
0-8064-0877-4
A36 -
Troubleshooting The Electrical System:
This series explains the various scales of
electrical measurement and demonstrates taking
voltage, current and resistance measurements.
Explanations on how to read a schematic diagram
are presented, and various electrical problems
are highlighted including short circuits and open
circuits. Proper procedures for wire repair are
also shown.
5 Part VHS
Series w/ Study Guide...........$369.00
Order
copies.
Order now
ISBN#:
0-8064-0006-4
A29 -
Automotive Starting Systems: This show
begins by describing how electric motors work.
The cranking motor is detailed and the
differences between series and shunt motors are
discussed. A demonstration of how the starting
system engages the pinion-ring gear is given.
System testing and component service and repair
is also presented.
4 Part VHS
Series w/ Study Guide...........$289.00
Order
copies.
Order now
ISBN#:
0-8064-0893-6
A34 -
Charging Systems Explained: This series
explains the role of the charging system and its
components. It shows the conversion of rotating
mechanical energy to electrical energy, details
flux line interaction between the rotor and
stator, and explains the purpose and function of
the voltage line regulator. Step-by-step
procedures for troubleshooting are also presented
using a GM CS-144 alternator.
5 Part VHS
Series w/ Study Guide...........$369.00
Order
copies.
Order now
ISBN#:
0-8064-0862-X
A22 -
Troubleshooting Port Fuel Injection:
This series presents the proper procedures for
maintaining a Port Fuel Injection system. It
describes all procedures for cleaning the
injectors, as well as all the steps for properly
and safely removing and/or replacing injectors.
Details for regular maintenance of the throttle
body are given, and explanations on flowchart
reading and understanding trouble codes are
presented.
6 Part VHS
Series w\Study Guide...........$429.00
Order
copies.
Order now
ISBN#:
0-8064-0948-7
A31 -
Drivability Troubleshooting: This series
presents information for troubleshooting various
drivability problems such as the No Start
condition, the No Start / No Spark condition, and
the No Start / No Fuel condition. Demonstrations
on customer service skills and customer interview
techniques are provided.
3 Part VHS
Series w\Study Guide............$229.00
Order
copies.
Order now
ISBN#:
0-8064-0968-1
A32 -
Drivability Troubleshooting-Hesitation Problems:
This series, a continuation of the A31 series,
deals with ignition-related, fuel related and
carburetion related drivability problems. It
shows how to evaluate spark timing, timing
advance and secondary circuit breakdown.
Demonstrations of various sensor tests are
presented, and it explains what to look for
during visual inspection of the accelerator pump
circuit, the choke operation, choke pull off, the
main metering circuit, and the idle circuit. The
series concludes with procedures for performing
the road test.
4 Part VHS
Series w\Study Guide............$289.00
Order
copies.
Order now
ISBN#:
0-8064-0002-1
A28 -
Antilock Brake Systems Explained: This
series describes the TEVES and the Bosch
anti-lock brake systems and details ABS theory
and operation. It describes the essential tools,
equipment and manuals needed for proper service
and effective troubleshooting. Also, explanations
of drum brake and disc brake operation,
diagnostic and repair are presented.
5 Part VHS
Series w\Study Guide............$369.00
Order
copies.
Order now
ISBN#:
0-8064-0936-3
A41 - Basic
Automotive Jobs: This series presents
step-by-step procedures for performing basic jobs
around the automotive shop such as using
reference material, basic underhood maintenance,
performing basic road service and basic component
replacement.
4 Part VHS
Series w/ Study Guide...........$289.00
Order
copies.
Order now
ISBN#:
0-8064-0350-0
A10 - Basic
Math For Auto Technicians: This series
covers the basic mathematic skills needed to work
on automotive systems: Working with Number,
Fractions & Decimals, Addition &
Subtraction, Multiplication & Division, and
Percentages, Ratios & Rates.
4 Part VHS
Series w/ Study Guide...........$289.00
Order
copies.
Order now
ISBN#:
0-8064-0021-8
A35 -
Automotive Engine Overhaul: This series
introduces the Double Overhead Cam (DOHC) engine.
It presents troubleshooting procedures for engine
removal and details compression testing.
Step-by-step procedures are shown for engine
removal, disassembly, and reassembly.
4 Part VHS
Series w\Study Guide............$289.00
Order
copies.
Order now
ISBN#:
0-8064-0008-0
A37 - Diesel
Preventive Maintenance: This series
presents methods of ongoing care for diesel fuel
systems, air systems, cooling systems,
lubricating systems and electrical systems. It
presents details for performing checks and
adjustments of the different systems, as well as
safety precautions.
4 Part VHS
Series w\Study Guide............$289.00
Order
copies.
Order now
ISBN#:
0-8064-0012-9
A21 - Port
Fuel Injection: This series explains the
advantages of fuel injection,details the
operation of basic parts and presents simple
repair procedures.
3 Part VHS
Series w/ Study Guide...........$229.00
Order
copies.
Order now
ISBN#:
0-8064-0870-7
A15 - Small
Engines: This series examines the basic
parts and uses of a small engine, and details
basic maintenance procedures. Complete
step-by-step procedures for disassembly and
reassembly of the engine are presented, as well
as instructions for performing common repair
procedures. The advantages and disadvantages of
an electronic ignition system are also discussed.
6 Part VHS
Series w\Study Guide............$429.00
Order
copies.
Order now
ISBN#:
0-8064-0385-3
Both
Video and MPEG CD-ROM..............$529.00
Order
copies.
Order now
AV5- AutoCAD® Release 14 Update:
This series includes all of the updates for
Release 14. From managing the graphics user
interface, to using the internet to send and
receive drawings, each topic is presented in a
clear and concise step-by-step fashion. Our
"seek-and-find" reference format makes
it easy for you to find the concept you want to
learn in a snap. And, the Lesson Sets which
accompany the program document every step shown,
plus offer additional valuable tips to help you
get the most out of AutoCAD® R14.
4 Part VHS
Series w/ Lesson Sets.....$269.00
Order
copies.
Order now
ISBN#:
0-8064-1632-7
AV6- First
Step for AutoCAD® LT.: This
series begins by discussing the GUI( Graphic User
Interface) and introduces the Command Line. This
series discusses Entity Creation, Displaying
& Modifying Drawings, Annotating Drawings,
and Data Exchange & the Output of files.
6 Part VHS
Series.............................$389.00
Order
copies.
Order now
TAV6 - Lesson
Sets...........................$97.00
Order
copies.
Order now
AV4- AutoCAD® Release 13:
This series begins by discussing the GUI( Graphic
User Interface) and introduces the Command Line.
This series discusses Draw Commands, Display
& Inquiry Commands, Modifying Drawings,
various Construction Techniques, Annotating
Drawings, and Data Exchange & Output of
files.
7 Part VHS
Series..............................$429.00
Order
copies.
Order now
AD4 - Lesson
Sets on Floppy Disks....$129.00
Order
copies.
Order now
ISBN#:
0-8064-8000-9
AV3 - AutoCAD® Basics R11 &
R12: This series details the basic
AutoCAD Releases 11 & 12 commands: Draw
Commands, Display, Layer & Inquiry Commands,
Edit Commands, Dimension, Text & Hatch
Commands, and View, Block & Plot Commands.
7 Part VHS
Series.............................$429.00
Order
copies.
Order now
TAV3 - Lesson
Sets...........................$97.00
Order
copies.
Order now
ISBN#:
0-8064-8036-X
D10 - AutoCAD® Explained:
This series describes the major components of a
CAD system. It also demonstrates how to boot the
computer hardware and AutoCAD software.
1 Part VHS
Series w/ Study Guide......$79.00
Order
copies.
Order now
ISBN#:
0-8064-0580-5
D12 - AutoCAD® Explained II:
This series examines the construction of true 3D
drawings and demonstrates the manipulation of
drawing by hide and rotate. The differences
between isometric and 3D drawings are explored.
This series also explains the Cartesian
coordinate system and shows the use of AutoCAD's
3D commands by constructing points and surfaces
in space. Also the concepts of wire frame and
solid modeling are explored.
4 Part VHS
Series w/ Study Guide......$289.00
Order
copies.
Order now
ISBN#:
0-8064-0589-9
D14 - AutoCAD® Release 10 For The
Beginner: This series demonstrates the
display features of View Ports and explains the
use of the 3D capabilities of line, 3DPOLY,
3DFACE, and 3DMESH in the construction of
drawings. This series shows how to edit the
drawing using pull-down menus and 3D editing
capabilities, and explains the use of Undo and
Redo for quick correction of errors. Lastly, this
series explains how to use dialogue boxes to
control Layers, Line-types and drawing aids.
4 Part VHS
Series w/ Study Guide........$289.00
Order
copies.
Order now
ISBN#:
0-8064-0885-9
D15 - AutoCAD® Release 10:
Advanced Operations: This series
demonstrates 3D drawing construction using many
of the features of AutoCAD Release 10, and
introduces LISP programs including Loading,
Creating and Executing. It explores AutoSHADE's
concepts, capabilities and commands enabling
students to transform their drawings into shaded
images in true perspective. This series also
details the process for creating an animated
movie.
4 Part VHS
Series w/ Study Guide.......$289.00
Order
copies.
Order now
ISBN#:
0-8064-0886-7
D16 -
Customizing AutoCAD®: This
series stresses the use of standards in symbol
creation and optimization of symbol
applicability, and discusses symbol complexity.
It also explores how to automate symbol insertion
and expands the use of symbols through LISP
programs.
2 Part VHS
Series w/ Study Guide........$149.00
Order
copies.
Order now
ISBN#:
0-8064-1189-9
D18 - AutoCAD® Release 12:
Architectural Drafting:This series Demonstrates
the creation of a simple structure and
demonstrates the use of Dialogue boxes, Grips and
the DLINE command. The creation of a typical Wall
Section is demonstrated, new dimensioning
variables are examined, and the use of drawing
attributes are explored. This series details how
to create and Elevation drawing and demonstrates
saving of multiple plotter configurations.
Lastly, this series explores the use of
integrated rendering features, defines
POSTSCRIPT, and explains how to use POSTSCRIPT
fonts and POSTSCRIPT fill patterns.
4 Part VHS
Series w/ Study Guide........$289.00
Order
copies.
Order now
ISBN#:
0-8064-0087-0
F51 -
Blueprint Reading Skills Explained: This
series shows the orthographic projection and
sequential presentation of part views, and
defines and identifies the various lines found on
the blueprint. It shows the use of detail and
assembly drawings, and explains the conventional
and baseline methods of print dimensioning,
including the use of datums. The use of the title
and revision box is explained, the meaning of
notes and symbols used on blueprints is detailed,
and the application of scale to the drawing is
shown. Lastly, basic welding symbols are detailed
and the use of those symbols by welders to follow
plans is explained.
4 Part VHS
Series w/ Study Guide........$289.00
Order
copies.
Order now
Bergwall Productions,
Inc. has just released on CD-ROM, BASIC
LABORATORY CHEMISTRY: FILTRATION / TEMPERATURE.This
program, Part 2 of a series of 5, is a
comprehensive self-instructional CD-ROM based on
the Films For The Humanities video series. This
self-paced program will explain the basic
techniques for working in today's chemistry
laboratory. This program covers gravity
filtration, suction filtration,
recrystallization, sublimation, refluxing,
measuring and controlling temperature,
determination of boiling temperature and
determining phase equilibria.
DB52
- BASIC LABORATORY CHEMISTRY: FILTRATION /
TEMPERATURE
2 Parts, 1
MPEG CDs (Windows W95)...............$149.00
Order
copies.
Order now
Bergwall Productions,
Inc. has just released on CD-ROM, BASIC
LABORATORY CHEMISTRY: BALANCES / GRAVIMETRIC
ANALYSIS.This program, Part 4 of a series of 5,
is a comprehensive self-instructional CD-ROM
based on the Films For The Humanities video
series. This self-paced program will explain the
basic techniques for working in today's chemistry
laboratory. This program features how to use
balances, a pipette and burner. Making up
solutions, performing gravimetric analysis,
electrogravimetric analysis for metals and
Kjeldahl determination of nitrogen are also
detailed.
C10 -
Entering The World Of Work: This series
distinguishes between human needs and wants,
introduces the law of supply and demand, and
discusses economic indicators and government
regulations. This series explores the individuals
relationship to the workplace and outlines
employer-employee expectations and coworker
relationships. Detailed steps for securing
employment are presented, and human and economic
resources are defined. Lastly, How to properly
manage finances is covered.
5 Part VHS
Series w/ Study Guide............$369.00
Order
copies.
Order now
ISBN#:
0-8064-0361-6
Both
Video and MPEG CD-ROM................$389.00
Order
copies.
Order now
(CD-ROM is
Currently Backordered)
C11 - Finding
Your Way In The Working World: This
series presents career planning aspects and
examines two major steps for choosing a career
path. Practical ways to prepare for an interview
are presented and some sure-fire follow-up
methods are described. This series provides a
framework for understanding taxes and the
different tax types, and discusses practical
information for becoming a wise consumer.
4 Part VHS
Series w/ Study Guide............$289.00
Order
copies.
Order now
ISBN#:
0-8064-0069-2
Both
Video and MPEG CD-ROM................$389.00
Order
copies.
Order now
C12 -
Communicating In The Workplace: This
series describes the different ways to
communicate in the workplace and examines the
communications model. This series explains how
knowing what is expected of you will assist you
in communicating and describes the steps of the
evaluation process. The four common communication
networks are introduced and various factors that
affect these networks are listed. This series
also explores skills used with supervisors in the
official and functional communication networks
and defines an open and closed supervisor.
4 Part VHS
Series w/ Study Guide............$289.00
Order
copies.
Order now
ISBN#:
0-8064-1136-8
Both
Video and MPEG CD-ROM................$389.00
Order
copies.
Order now
C13 - How To
Write A Resume: This series discusses
letter styles including return address,
salutation, the body, complimentary close and
signature. Various letter formats are presented,
and the actual writing of a resume is detailed.
2 Part VHS
Series w/ Study Guide............$149.00
Order
copies.
Order now
DA15 - Small
Engines: This series examines the basic
parts and uses of a small engine, and details
basic maintenance procedures. Complete
step-by-step procedures for disassembly and
reassembly of the engine are presented, as well
as instructions for performing common repair
procedures. The advantages and disadvantages of
an electronic ignition system are also discussed.
6 Parts, 2
MPEG CDs(Windows 3.1 & W
95)...................$429.00
Order
copies.
Order now
DA26 -
Electricity For Auto Technicians: This
series explains conventional and electron
theories and details the operation of the
electrical system. Practical uses of various
testing equipment is presented and electrical
diagnostic techniques are presented
5 Parts, 2
MPEG CDs (Windows 3.1 & W95
)..................$369.00
Order
copies.
Order now
DA38 - Auto
Emission Explained: This series defines
what emissions are and how they affect the
environment. Mechanical and electrical emission
control devices are presented and troubleshooting
techniques are provided.
4 Parts, 2
MPEG CDs (Windows 3.1 &
W95).....................$289.00
Order
copies.
Order now
DA39 -
Automotive Suspension Systems: This
series describes the different frame types and
tire types and their relation to the car
suspension system. It explains wheel dimensioning
including wheel diameter, rim diameter and rim
width. The various suspension systems are
presented as well as the various steering systems
and their function. The importance of steering
angles is also covered.
4 Parts, 2
MPEG CDs (Windows 3.1 &
W95)....................$289.00
Order
copies.
Order now
DA40 -
Working Safely In The Auto Shop:precautions
for working safely under the car and on various
automotive systems. The proper handling of
hazardous waste is also discussed. This series
covers general safety practices, demonstrates
safety
4 Parts, 2
MPEG CDs (Windows 3.1 &
W95)....................$289.00
Order
copies.
Order now
DA42 -
Automotive Air Conditioning Systems Explained:
This series covers basic air conditioning
principles such as heat transfer and the
refrigeration cycle. Systems component and system
controls are defined as well as the servicing of
the air conditioning system.
4 Parts, 2
MPEG CDs (Windows 3.1 &
W95)....................$289.00
Order
copies.
Order now
DA44 -
Advanced Fuel Injection Systems: This
series explains the various injection systems
including PFI, SFI and CMPFI. Comparisons are
made between Open-Loop and Closed-Loop operation
and diagnostic case studies of various models are
featured.
3 Parts, 1
MPEG CD (Windows 3.1
&W95)......................$229.00
Order
copies.
Order now
DA45 -
Troubleshooting Antilock Brake Systems:
This series covers ABS similarities and
differences, presents ABS safety precautions and
teaches maintenance and basic diagnostic
techniques. Sample work orders are also shown.
4 Parts, 2
MPEG CDs (Windows 3.1 &
W95).....................$289.00
Order
copies.
Order now
DB17 - Frog
Dissection Explained: This series
explains why we dissect a frog and details
amphibian characteristics. All external and
internal organs are identified. Safety
precautions are also stressed.
2 Parts, 1
MPEG CD (Windows 3.1 &
W95).....................$149.00
Order
copies.
Order now
DC10 -
Entering The World Of Work:This series
distinguishes between human needs and wants,
introduces the law of supply and demand, and
discusses economic indicators and government
regulations. This series explores the individuals
relationship to the workplace and outlines
employer-employee expectations and coworker
relationships. Detailed steps for securing
employment are presented, and human and economic
resources are defined. Lastly, How to properly
manage finances is covered.
5 Parts, 2
MPEG CDs (Windows 3.1 &
W95).....................$369.00
Order
copies.
Order now
DC11 -
Finding Your Way In The Working World:
This series presents career planning aspects and
examines two major steps for choosing a career
path. Practical ways to prepare for an interview
are presented and some sure-fire follow-up
methods are described. This series provides a
framework for understanding taxes and the
different tax types, and discusses practical
information for becoming a wise consumer.
4 Parts, 2
MPEG CDs (Windows 3.1 &
W95).....................$289.00
Order
copies.
Order now
DC12 -
Communicating In The Work Place: This
series describes the different ways to
communicate in the workplace and examines the
communications model. This series explains how
knowing what is expected of you will assist you
in communicating and describes the steps of the
evaluation process. The four common communication
networks are introduced and various factors that
affect these networks are listed. This series
also explores skills used with supervisors in the
official and functional communication networks
and defines an open and closed supervisor.
4 Parts, 2
MPEG CDs (Windows 3.1 &
W95).....................$289.00
Order
copies.
Order now
DE10 -
Multimeters Explained: This series
details the basic features of analog and digital
multimeters, proper set up of both meters and
stresses safety precautions. Also, demonstrations
for making continuity tests, resistance, voltage
and current measurements are shown.
3 Parts, 1
AVI CD (Windows 3.1 &
W95)...........................$229.00
Order
copies.
Order now
DE12 - Basic
Electricity: Direct Current: This series
introduces the basic concepts of electricity,
electron theory, current, voltage and resistance.
Basic formulas are explained and Ohm's Law is
introduced. This series details common electronic
symbols and describes the procedures for wiring
simple circuits including proper cutting and
stripping techniques. Explanations for using
ammeters and voltmeters are given, and
comparisons of circuits with varying voltage and
resistance are made.
4 Parts, 1
MPEG CD (Windows 3.1 &
W95).......................$289.00
Order
copies.
Order now
DE16 - Basic
Electricity: DC Circuits: This series
explains how the concept of voltage, current and
resistance is affected by series and parallel
circuit design. and details the procedures for
breadboarding. This series also explains the
standard Color Code Identification Chart. This
series explains how to determine voltage,
current, resistance and power at various point in
a circuit, and details the use of Ohm's Law.
Schematic diagrams for series and parallel
circuits are compared using a breadboard.
4 Parts, 2
MPEG CDs (Windows 3.1 &
W95).....................$289.00
Order
copies.
Order now
DE17 -
Alternating Current Fundamentals: This
series introduces the major categories of AC
usage for electrical power, and discusses
magnetism and relates magnetism to electricity.
This series introduces how electricity is
generated and examines the parts of a simple
generator. Various ways of producing AC and the
construction of the AC waveform are discussed,
along with demonstrations of using the
oscilloscope to take measurements. The basic
concepts of capacitors, inductors and
transformers are introduced as well as the basic
concepts of reactance and electrical power.
5 Parts, 3
MPEG CDs (Windows 3.1 &
W95).....................$369.00
Order
copies.
Order now
DE22 -
Working Safely With Electricity: This
series details what happens when current flows
though the body and reviews the fundamental
principles of electricity. The importance of
maintaining a safe work environment is emphasized
and appropriate dress for electrical work is
described. The importance of grounding is
detailed and the color-code system of identifying
electrical wires is examined. Finally, emergency
response techniques are presented as well as safe
operation of fire extinguishers.
4 Parts, 2
MPEG CDs (Windows W95).............................$289.00
Order
copies.
Order now
DE23 -
Advanced AC Circuits: This series
explores the relationships among resistors,
capacitors and inductors with voltage and
current. Fundamental applications of time
constants: RC, Universal, L/R, RL and RC
integrators and differentiators are presented.
This series also examines phasors, the sine wave
formula, phasor diagrams, the angular velocity of
a phasor and the Pythagorean Theorem. It reviews
capacitive reactance, explores the phase
relationship between voltage and current in
series and parallel RC circuits, and introduces
the concept of impedance and frequency
relationships. It examines sine wave response to
series-parallel RL and RLC circuits and reviews
inductive reactance for both.
5 Parts, 3
MPEG CDs (Windows 3.1 &
W95).....................$369.00
Order
copies.
Order now
DE40 -
Introduction To PC Maintenance & Repair: This
series introduces the PC Troubleshooting Triad
and details PC hardware software and operating
systems. Descriptions of different computer
configurations are presented and various types of
PC environments are detailed. Basic maintenance
and troubleshooting techniques are explained as
well as tips for reducing the effects of magnetic
fields and working safely with electrical
components.
4 Parts, 2
MPEG CD (Windows 3.1 &
W95)......................$289.00
Order
copies.
Order now
DE45 -
Introduction To Residential Wiring: This
series details the National Electrical Code 1996
changes, explains building inspections, service
inspection, rough and finished installation, and
introduces symbology, wire gauges, and wire color
code. It highlights planning the location of
service panels and details installation of
electric feed from the Electric Company, to the
meter base, to the service panel. The various
voltage ranges and outlet types are presented and
roughing in and finish installation of outlets
are detailed. Lastly, the installation of various
switches and switched circuits are detailed such
as single, three-way, four-way, timer, dimmer,
motion and time delay.
4 Parts, 2
MPEG CDs (Windows W95)............................$289.00
Order
copies.
Order now
DE60 - Fiber
Optic Explained: This series explores
the close relationship between electronics and
fiber optics. Various mediums of communication
are described and a comparison of light to sound
is presented. This series answers the questions
"What is Light?" and "How can I
put it to work?" and details the properties
of light. The various types of information that
light can carry is introduced as well as the
various types of fiber used.
4 Parts, 2
MPEG CDs (Windows 3.1 &
W95)....................$289.00
Order
copies.
Order now
DE70 -
Electronic Communication Fundamentals:
This series presents the evolution of electronic
communication, including the telegraph and the
telephone. The concept of Electromagnetic
Radiation is detailed, as well as the concept of
carrier frequencies. Part 2 explains the
antenna-ground system and introduces the
operation of the tuner and reproducer. An
explanation of what modulation is and why it is
used is given along with details differentiating
Amplitude Modulation, Frequency Modulation and
Phase Modulation. This series concludes with an
introduction to bandwidths and sidebands and a
discussion on the concept of Frequency Division
Multiplexing and Time Division Multiplexing.
4 Parts, 2
MPEG CDs (Windows 3.1 &
W95)....................$289.00
Order
copies.
Order now
DF10 -
Reading A Ruler: This series defines the
basic terminology, how to read a ruler and record
linear measurements. It details how to read
fourths, eighths and sixteenths of an inch using
a fractional inch ruler. This series also
demonstrates how to read centimeters and
millimeters and explains now to record metric
measurements.
2 Parts, 1
MPEG CDs (Windows 3.1 &
W95).....................$149.00
Order
copies.
Order now
DF11 - Basic
Math: Fractions & Decimals: This
series defines the basic terminology of fractions
and mixed numbers and shows how to reduce
fractions to their simplest form. This series
demonstrates how to find common denominators,
convert mixed numbers to improper fractions, and
add and subtract fractions and mixed numbers.
Demonstrations are also given for the
multiplication and division of fractions and
mixed numbers. The basic concepts of decimals is
defined and demonstrations for adding,
subtracting, multiplying and dividing decimals
are shown. The conversion of fractions to
decimals and to percentages are shown as well as
rounding numbers.
5 Parts, 2
MPEG CDs (Windows 3.1 &
W95).....................$369.00
Order
copies.
Order now
DF50 -
Welding Shop Safety: This series
describes the importance of personal safety when
using welding machines and tools, and details
specific steps to avoid eye, skin and foot
injuries. It compares the flow of electricity in
an arc welding station with the flow in a simple
electrical circuit, and explains how to locate
and repair hazards to prevent electrical
injuries. This series also describes the dangers
of noxious fumes and smoke, and shows potential
fire hazards, plus introduces commonly used fire
extinguishers and their specific applications.
The proper storage and handling of oxygen and
acetylene cylinders is shown along with how to
properly detect oxygen and acetylene leaks in an
oxy-fuel station.
4 Parts, 2
MPEG CDs (Windows 3.1 &
W95).....................$289.00
Order
copies.
Order now
DH10 - Fluid
Power: This series presents and overview
of the fluid power system, and introduces both
Pascal's Law and Bernoulli's Principle. It
examines two main kinds of actuators, cylinders
and motors and shows the calculations for
cylinder velocity and force. It describes the
major types of controls including pressure
control and valves, flow control, directional
control and solenoids. It also identifies the
main components of power units and discusses
displacement and its measurement in pumps, as
well as considers the three types of pumps: gear,
vane and piston.
4 Parts, 2
MPEG CDs (Windows 3.1 &
W95).....................$289.00
Order
copies.
Order now
DT13 -
Introduction To Technology Education:
This series begins by defining technology and
traces technological developments from
prehistoric times to present day. Part 2
delineates seven basic types of resources
required for all systems: people, information,
materials, tools/machines, capital, energy and
time. Procedures are presented for diagramming
and flowcharting, as well as basic technological
problem solving. Lastly, a discussion on how
technology can either solve or create problems
are presented.
4 Parts, 2
MPEG CDs (Windows 3.1, W95 this summer)...$289.00
Order
copies.
Order now
C20 - Child
Care: Outdoor Safety: This series
details managing a facility that promotes safe,
imaginative play, and explains the developmental
importance of outdoor play for children. It
highlights caregiver's supervision of on-site
outdoor play, and explains specific dangers
presented by common playground equipment. This
series also explores field trip preparation
including parental permission, safety, site
review, transportation, scheduling, liability,
and the importance of appropriate clothing as
well as the importance of quick, calm emergency
reaction.
3 Part VHS
Series w/ Study Guide...........$229.00
Order
copies.
Order now
ISBN#:
0-8064-0829-8
C21 - Child
Care: Indoor Safety: This series
highlights design safety features in the care
center by providing a room-by-room walkthrough,
and explains the importance of building
inspections. The Site Safety Checklist is
introduced as a means of inspecting the care
setting, and an explanation of the Injury Log is
presented. Lastly, the importance of caregiver
input and staff meetings in maintaining safety is
explained, along with details on the appropriate
adult/child ratios in order to maintain a safe
level of supervision.
3 Part VHS
Series w/ Study Guide...........$229.00
Order
copies.
Order now
E22 - Working
Safely With Electricity: This series
details what happens when current flows though
the body and reviews the fundamental principles
of electricity. The importance of maintaining a
safe work environment is emphasized and
appropriate dress for electrical work is
described. The importance of grounding is
detailed and the color-code system of identifying
electrical wires is examined. Finally, emergency
response techniques are presented as well as safe
operation of fire extinguishers.
4 Part VHS
Series w/ Study Guide..........$289.00
Order
copies.
Order now
F10 - Reading
A Ruler: This series defines the basic
terminology, how to read a ruler and record
linear measurements. It details how to read
fourths, eighths and sixteenths of an inch using
a fractional inch ruler. This series also
demonstrates how to read centimeters and
millimeters and explains now to record metric
measurements.
4 Part VHS
Series w/ Study Guide...........$149.00
Order
copies.
Order now
Both
Video and MPEG CD-ROM...............$249.00
Order
copies.
Order now
F11 - Basic
Math: Fractions & Decimals: This
series defines the basic terminology of fractions
and mixed numbers and shows how to reduce
fractions to their simplest form. This series
demonstrates how to find common denominators,
convert mixed numbers to improper fractions, and
add and subtract fractions and mixed numbers.
Demonstrations are also given for the
multiplication and division of fractions and
mixed numbers. The basic concepts of decimals is
defined and demonstrations for adding,
subtracting, multiplying and dividing decimals
are shown. The conversion of fractions to
decimals and to percentages are shown as well as
rounding numbers.
5 Part VHS
Series w/ Study Guide....................$369.00
Order
copies.
Order now
Both
Video and MPEG CD-ROM........................$469.00
Order
copies.
Order now
M40 - Basic
Masonry: This series identifies and
explains the use of common tools used for
spreading mortar and details various techniques.
It introduces construction with mortar and bricks
with emphasis on eye-hand coordination and
explains potential trouble spots when working
with mortar. The use of the mason's rule, frame
square runner and jointer and level are shown,
and a demonstration for setting up a work station
is given. The series concludes with a two part
demonstration of wall construction from start to
finish.
5 Part VHS
Series w/ Study Guide....................$369.00
Order
copies.
Order now
M41 - Masonry
Block Explained: This series begins by
demonstrating how block is made by featuring a
walk through a masonry block block factory. The
safe operation of a power mixer is presented
along with how to properly mix and judge the
quality of mortar. It explains how to properly
layout a job from plans for corner construction
and emphasizes the importance of level and plumb.
A demonstration is given for proper layout and
construction of a masonry block wall using
8" blocks.
4 Part VHS
Series w/ Study Guide....................$289.00
Order
copies.
Order now
R30 - Basic
Air Conditioning: This series contrasts
the design and operation of various types of air
conditioners. The different temperature
measurements are defined, and the relationship
between heat and pressure are explored. It
examines and shows the interaction of the
compressor, evaporator, the drain systems,
condenser, receiver expansion valve, and the
capillary tube. The electrical controls are also
discussed including starting the compressor and
the fan controls. It concludes with
troubleshooting techniques for detecting
refrigerant leaks and other problems as well as
presenting basic repairs procedures.
4 Part VHS
Series w/ Study Guide.....................$289.00
Order
copies.
Order now
T12 -
Construction Systems Technology: This
series defines the construction fields as a
system and examines the inputs component. It
introduces seven basic types of resources and
identifies employment opportunities in various
construction fields. This series also outlines
initial stages of building a structure: site
preparation, clearing, grading and accessing
utilities as well as examining structural
foundations, excavation, footings, piers, piles,
poured concrete and cinder block. Detail
procedures for finishing the structure are
highlighted.
5 Part VHS
Series w/ Study Guide....................$369.00
Order
copies.
Order now
E10 -
Multimeters Explained: This series
details the basic features of analog and digital
multimeters, proper set up of both meters and
stresses safety precautions. Also, demonstrations
for making continuity tests, resistance, voltage
and current measurements are shown.
3 Part VHS
Series w/ Study Guide...........$229.00
Order
copies.
Order now
ISBN#:
0-8064-1503-7
Both
Video and AVI CD-ROM...................$329.00
Order
copies.
Order now
E12 - Basic
Electricity: Direct Current: This series
introduces the basic concepts of electricity,
electron theory, current, voltage and resistance.
Basic formulas are explained and Ohm's Law is
introduced. This series details common electronic
symbols and describes the procedures for wiring
simple circuits including proper cutting and
stripping techniques. Explanations for using
ammeters and voltmeters are given, and
comparisons of circuits with varying voltages and
resistance are made.
4 Part VHS
Series w/ Study Guide...........$289.00
Order
copies.
Order now
ISBN#:
0-8064-0497-3
Both
Video and MPEG CD-ROM...............$389.00
Order
copies.
Order now
E13 -
Understanding Digital Electronics: This
series examines the AND function with simple
switching networks, explores OR and NOT functions
from switching networks and distinguishes between
logic symbols and Boolean expression. NAND and
NOR functions are compared to AND-NOT and OR-NOT
circuits, and XOR and XNOR functions are
developed from combinations of primary logic
gates. Truth tables are developed for all.
4 Part VHS
Series w/ Study Guide...........$289.00
Order
copies.
Order now
ISBN#:
0-8064-0728-X
E14 - Basic
Digital Math: This series describes the
purpose for digital technology and explores
various design features. This series introduces
binary and explains the conversions from binary
to decimal and decimal to binary. Additional
systems, Octal, BCD and hexadecimal are
presented. Addition, subtraction, multiplication
and division of binary numbers is explained, and
the basic laws of Boolean algebra are discussed.
5 Part VHS
Series w/ Study Guide...........$369.00
Order
copies.
Order now
ISBN#:
0-8064-1099-X
E16 - Basic
Electricity: DC Circuits: This series
explains how the concept of voltage, current and
resistance is affected by series and parallel
circuit design. and details the procedures for
breadboarding. This series also explains the
standard Color Code Identification Chart. This
series explains how to determine voltage,
current, resistance and power at various point in
a circuit, and details the use of Ohm's Law.
Schematic diagrams for series and parallel
circuits are compared using a breadboard.
4 Part VHS
Series w/ Study Guide...........$289.00
Order
copies.
Order now
ISBN#:
0-8064-0832-8
Both
Video and MPEG CD-ROM...............$389.00
Order
copies.
Order now
E17 -
Alternating Current Fundamentals: This
series introduces the major categories of AC
usage for electrical power, and discusses
magnetism and relates magnetism to electricity.
This series introduces how electricity is
generated and examines the parts of a simple
generator. Various ways of producing AC and the
construction of the AC waveform are discussed,
along with demonstrations of using the
oscilloscope to take measurements. The basic
concepts of capacitors, inductors and
transformers are introduced as well as the basic
concepts of reactance and electrical power.
5 Part VHS
Series w/ Study Guide...........$369.00
Order
copies.
Order now
ISBN#:
0-8064-0365-9
Both
Video and MPEG CD-ROM...............$469.00
Order
copies.
Order now
E18 - A/D and
D/A Converters: This series discusses
the nature of signals, compares analog quantities
with sampled digital representations, and
introduces converter characteristics. This series
presents the mathematics behind A/D and D/A
conversion and demonstrated building a three-bit
simultaneous converter. Binary weighted D/A
converters with actual circuitry and schematics
are explored, and the DAC-08 8-bit D/A converter
with actual circuitry is introduced. The types of
A/D converters built around D/A converters are
introduced and descriptions of the delta and
successive approximation converters are
presented.
4 Part VHS
Series w/ Study Guide............$289.00
Order
copies.
Order now
ISBN#:
0-8064-1074-4
E19 -
Introduction To Programmable Logic Controllers:
This series examines how and why PLCs are used in
automated factories and describes its basic
capabilities. The various types of communication
that occurs between a PLC and other devices is
examined and a demonstration of how to use an
industrial PLC, including programming in ladder
diagram, hardwiring, loading and running a
program is given. This series also demonstrates
programming in statement list format, hardwiring
and general operation.
4 Part VHS
Series w/ Study Guide............$289.00
Order
copies.
Order now
ISBN#:
0-8064-7248-0
E20 - Using
Dual Trace Oscilloscopes: This series
explains the function of the oscilloscope and the
difference between dual and single trace. The use
of controls to position the tract on the CRT is
covered and the use of the graticule to determine
peak-to-peak voltage and frequency is shown. This
series explains the difference between AC, ground
and DC coupling, and how to determine the DC
component of a signal. The use of mode controls
to obtain a display suitable for analysis is
shown and demonstrations of how to avoid making
common mistakes when using scopes.
6 Part VHS
Series w/ Study Guide............$529.00
Order
copies.
Order now
ISBN#:
0-8064-1518-5
E22 - Working
Safely With Electricity: This series
details what happens when current flows though
the body and reviews the fundamental principles
of electricity. The importance of maintaining a
safe work environment is emphasized and
appropriate dress for electrical work is
described. The importance of grounding is
detailed and the color-code system of identifying
electrical wires is examined. Finally, emergency
response techniques are presented as well as safe
operation of fire extinguishers.
4 Part VHS
Series w/ Study Guide...........$289.00
Order
copies.
Order now
ISBN#:
0-8064-1019-1
E23 -
Advanced AC Circuits: This series
explores the relationships among resistors,
capacitors and inductors with voltage and
current. Fundamental applications of time
constants: RC, Universal, L/R, RL and RC
integrators and differentiators are presented.
This series also examines phasors, the sine wave
formula, phasor diagrams, the angular velocity of
a phasor and the Pythagorean Theorem. It reviews
capacitive reactance, explores the phase
relationship between voltage and current in
series and parallel RC circuits, and introduces
the concept of impedance and frequency
relationships. It examines sine wave response to
series-parallel RL and RLC circuits and reviews
inductive reactance for both.
5 Part VHS
Series w/ Study Guide...........$369.00
Order
copies.
Order now
ISBN#:
0-8064-0325-X
E24 -
Electronic Circuit Troubleshooting: This
series presents the proper use of hand tools and
test equipment for electronic troubleshooting.
Definitions are given for static electricity,
opens and shorts and details for personal,
equipment and component safety are presented.
Common problems and failures are introduced and
measurement methods using analog and digital test
equipment are presented. Also, a comparison of
various testing procedures is discussed.
4 Part VHS
Series w/ Study Guide...........$289.00
Order
copies.
Order now
ISBN#:
0-8064-0491-4
E27 - Power
Supplies Explained: This series
introduces power transformer fundamentals and
presents rectifier theory. Two primary types of
full-wave rectifiers are explored: center tapped
transformers and bridge rectifiers. This series
also review capacitor operation and describes the
problem of DC ripple voltage. Voltage
multipliers, half-wave doublers, full-wave
doublers, triplers and quadruplers are examined
along with clipper circuits and clamper circuits.
procedures for troubleshooting and diagnosing
power supply problems are presented.
5 Part VHS
Series w/ Study Guide...........$369.00
Order
copies.
Order now
ISBN#:
0-8064-0029-3
E28 -
Operational Amplifiers Explained: This
series introduces the universal amplifier model
and describes amplifier specifications, input
resistance and output resistance. This series
explores op-amp internal functional blocks and
demonstrates the circuits used to construct
blocks. Principles, advantages and disadvantages
of negative feedback are described and the
non-inverting amplifier is detailed.
4 Part VHS
Series w/ Study Guide...........$289.00
Order
copies.
Order now
ISBN#:
0-8064-0001-3
E30 -
Semiconductors Explained: This series
introduces the fundamentals of semiconductor
physics, presents basic materials and the concept
of electron-hole flow. The significant
specifications and ratings of the diode, its
maximum DC forward current, breakdown voltage,
maximum power dissipation and I-V graph is
introduced, along with various diode
applications. Lastly, the fundamentals of bipolar
transistors is presented and the operation NPN
devices is detailed.
4 Part VHS
Series w/ Study Guide...........$289.00
Order
copies.
Order now
ISBN#:
0-8064-0014-5
E40 - PC
Maintenance & Repair: This series
introduces the PC Troubleshooting Triad and
details PC hardware software and operating
systems. Descriptions of different computer
configurations are presented and various types of
PC environments are detailed. Basic maintenance
and troubleshooting techniques are explained as
well as tips for reducing the effects of magnetic
fields and working safely with electrical
components.
4 Part VHS
Series w/ Study Guide...........$289.00
Order
copies.
Order now
ISBN#:
0-8064-1276-3
Both
Video and MPEG CD-ROM............$389.00
Order
copies.
Order now
E45 -
Introduction To Residential Wiring: This
series details the National Electrical Code 1996
changes, explains building inspections, service
inspection, rough and finished installation, and
introduces symbology, wire gauges, and wire color
code. It highlights planning the location of
service panels and details installation of
electric feed from the Electric Company, to the
meter base, to the service panel. The various
voltage ranges and outlet types are presented and
roughing in and finish installation of outlets
are detailed. Lastly, the installation of various
switches and switched circuits are detailed such
as single, three-way, four-way, timer, dimmer,
motion and time delay.
4 Part VHS
Series w/ Study Guide...........$289.00
Order
copies.
Order now
ISBN#:
0-8064-1278-X
E50 -
Rotating Machinery: This series shows
the difference between permanent and temporary
magnets and explains the direction of magnetic
force, poles and the nature of the magnetic
field. It describes the magnetic field that is
created around a current carrying conductor and
coil, and introduces Weber's Theory. This series
also introduces Magnetomotive Force(MMF) and
Electromotive Force(EMF), and describes the
effect electricity has on different types of
materials in creating or sustaining a magnetic
field.
3 Part VHS
Series w/ Study Guide...........$229.00
Order
copies.
Order now
ISBN#:
0-8064-1104-X
E51 - Direct
Current Generators: This series explains
the basic concept of simple DC generators and
describes the function of generator components.
It explains how to calculate generator EMF and
saturation curves, and discusses power losses and
equations for machine efficiency. This series
also describes the major types of DC generators,
separately excited generators, and three types of
self-excited generators.
3 Part VHS
Series w/ Study Guide...........$229.00
Order
copies.
Order now
ISBN#:
0-8064-1117-1
E60 - Fiber
Optics Explained: This series explores
the close relationship between electronics and
fiber optics. Various mediums of communication
are described and a comparison of light to sound
is presented. This series answers the questions
"What is Light?" and "How can I
put it to work?" and details the properties
of light. The various types of information that
light can carry is introduced as well as the
various types of fiber used.
4 Part VHS
Series w/ Study Guide...........$289.00
Order
copies.
Order now
ISBN#:
0-8064-0303-9
Both
Video and MPEG CD-ROM...............$389.00
Order
copies.
Order now
E70 -
Electronic Communication Fundamentals:
This series presents the evolution of electronic
communication, including the telegraph and the
telephone. The concept of Electromagnetic
Radiation is detailed, as well as the concept of
carrier frequencies. Part 2 explains the
antenna-ground system and introduces the
operation of the tuner and reproducer. An
explanation of what modulation is and why it is
used is given along with details differentiating
Amplitude Modulation, Frequency Modulation and
Phase Modulation. This series concludes with an
introduction to bandwidths and sidebands and a
discussion on the concept of Frequency Division
Multiplexing and Time Division Multiplexing.
4 Part VHS
Series w/ Study Guide...........$289.00
Order
copies.
Order now
ISBN#:
0-8064-0450-7
F13 - Basic
Math For Electronics: This series
introduces the use of exponents and explores
basic mathematics using scientific notation. This
series explains how to find unknown values such
as resistance, voltage and current and how to
re-arrange formulas to solve unknowns. Kirchoff's
Voltage Law is detailed and descriptions are
given for finding unknown values in both series
and parallel circuits.
4 Part VHS
Series w/ Study Guide...........$289.00
Order
copies.
Order now
ISBN#:
0-8064-
R30 - Basic
Air Conditioning: This series contrasts
the design and operation of various types of air
conditioners. The different temperature
measurements are defined, and the relationship
between heat and pressure are explored. It
examines and shows the interaction of the
compressor, evaporator, the drain systems,
condenser, receiver expansion valve, and the
capillary tube. The electrical controls are also
discussed including starting the compressor and
the fan controls. It concludes with
troubleshooting techniques for detecting
refrigerant leaks and other problems as well as
presenting basic repairs procedures.
4 Part VHS
Series w/ Study Guide..........$289.00
Order
copies.
Order now
N10 - Nursing
Assistant: This series discusses the
role of the Nursing Assistant. It stresses the
importance of the patient's dignity and personal
safety. as well as discussing Universal
precautions and infection control. Personal Care
procedures are covered including bathing, hygiene
and bedmaking. Also, the measurement of vital
signs is demonstrated.
4 Part VHS
Series w/ Study Guide...........$289.00
Order
copies.
Order now
ISBN#:
0-8064-0023-4
N20 -
Phlebotomy & Electrocardiography:
This series explains Phlebotomy and
Electrocardiography, and details the types of
specimens including venous, arterial and
capillary. Safety techniques are stressed
throughout including the use of gloves and needle
disposal. NNCLES Standards are introduced and the
proper techniques for obtaining a specimen are
described. It explains the basic anatomy and
physiology of the cardiovascular system, and
explains Electrocardiography testing procedures
using single channel and three channel machines.
4 Part VHS
Series w/ Study Guide...........$289.00
Order
copies.
Order now
G11 -
Precision Measuring Tools: This series
introduces scale measuring to 1/1000th of an
inch. The use of the outside micrometer, bore
gauges and depth gauges is demonstrated along
with the use protractors and gauge blocks. This
series begins by introducing the vernier caliper
and explains the 32 and and 64th
6 Part VHS
Series w/ Study Guide...........$529.00
Order
copies.
Order now
ISBN#:
0-8064-1328-X
H10 - Fluid
Power: This series presents and overview
of the fluid power system, and introduces both
Pascal's Law and Bernoulli's Principle. It
examines two main kinds of actuators, cylinders
and motors and shows the calculations for
cylinder velocity and force. It describes the
major types of controls including pressure
control and valves, flow control, directional
control and solenoids. It also identifies the
main components of power units and discusses
displacement and its measurement in pumps, as
well as considers the three types of pumps: gear,
vane and piston.
4 Part VHS
Series w/ Study Guide...........$289.00
Order
copies.
Order now
ISBN#:
0-8064-0604-6
Both
Video and MPEG CD-ROM............$389.00
Order
copies.
Order now
Q22 -
Statistical Process Control For Managers:
This series presents the basic concepts of SPC
and provides insight into the re-defining the
roles of managers and supervisors as it relates
to SPC integration. It introduces Statistical
Theory and details distribution, sigma values and
the concept of Standard Deviation. It explains
assignable and random causes of process
variability and introduces the Xbar. Lastly, it
explains formulas for Standard Deviation and
details calculations for upper and lower control
limits for an attribute chart.
4 Part VHS
Series w/ Study Guide...........$289.00
Order
copies.
Order now
ISBN#:
0-8064-1395-6
Q23 -
Statistical Process Control For Operators:
This series presents the basic concepts of SPC
and provides insight into the re-defining the
roles of operators as it relates to SPC
integration. It introduces the Xbar and R chart
and explores the concept of sample data
collection and recording on the chart. Lastly, it
demonstrates data collection and recording on the
P, Np, C and U charts, plus stresses math skills.
3 Part VHS
Series w/ Study Guide...........$229.00
Order
copies.
Order now
ISBN#:
0-8064-1425-1
Note: The
following shows are OSHA compliant safety training
programs
Q30 - First
Aid: This program discusses proper first
aid procedures for sprains and muscle pulls,
identifies lacerations and bleeding and examines
broken bones, shock burns, artificial respiration
and CPR.
1 Part VHS
Tape w/ Presenter's Guide
Poster &
15 Employee Booklets....................$159.00
Order
copies.
Order now
ISBN#:
0-8064-9600-2
Q31 - Eye
Safety: This program describes how the
eye works and explores the effects of eye
injuries as well as the common types and causes
of eye injuries. It stresses care and safety
practices and personal protective equipment.
1 Part VHS
Tape w/ Presenter's Guide
Poster &
15 Employee Booklets....................$159.00
Order
copies.
Order now
ISBN#:
0-8064-9602-9
Q32 - Back
Safety: This program describes bow the
back works and highlights the common types and
causes of back injury. It covers the effects of
back injuries and injury prevention and safety
practices. Also, it explores basic back exercises
and proper lifting techniques.
1 Part VHS
Tape w/ Presenter's Guide
Poster &
15 Employee Booklets....................$159.00
Order
copies.
Order now
ISBN#:
0-8064-9604-5
Q33 - Ladder
Safety: This program discusses the basic
rules for ladder use including proper placement
and ladder maintenance. It explains the buddy
system and describes tying off and blocking
ladders, as well as overhead hazards.
1 Part VHS
Tape w/ Presenter's Guide
Poster &
15 Employee Booklets.....................$159.00
Order
copies.
Order now
ISBN#:
0-8064-9611-8
Q36 - Safety
Orientation: This program covers proper
tool use and maintenance and discusses developing
a "safety sense". The use of personal
protective equipment is highlighted.
1 Part VHS
Tape w/ Presenter's Guide
Poster &
15 Employee Booklets.....................$159.00
Order
copies.
Order now
ISBN#:
0-8064-9639-8
Q38 - Hand
& Power Tool Safety: This program
discusses matching the right tool to the job and
tool safety practices. It also describes how
materials cause accidents and anticipating
hazards and chemical splashes.
1 Part VHS
Tape w/ Presenter's Guide
Poster &
15 Employee Booklets....................$159.00
Order
copies.
Order now
ISBN#:
0-8064-9615-0
Q39 - Hearing
Safety: This program describes how the
ear works and identifies different types of
hearing problems, the causes of hearing damage
and the effects of hearing damage. It discusses
noise avoidance and safety practices and personal
protective equipment.
1 Part VHS
Tape w/ Presenter's Guide
Poster &
15 Employee Booklets....................$159.00
Order
copies.
Order now
ISBN#:
0-8064-9608-8
Q40 - Hand,
Wrist & Finger Safety: This program
explores the physiology of the hand, wrist and
finger, and demonstrates proper tool use and
maintenance, plus using personal protective
equipment.
1 Part VHS
Tape w/ Presenter's Guide
Poster &
15 Employee Booklets....................$159.00
Order
copies.
Order now
ISBN#:
0-8064-9606-1
Q41 - Slips,
Trips & Falls: This program explains
causes of slips, trips and falls, and presents
avoidance techniques. It stresses the role of
safety shoes, ladders and other equipment.
1 Part VHS
Tape w/ Presenter's Guide
Poster &
15 Employee Booklets....................$159.00
Order
copies.
Order now
ISBN#:
0-8064-9621-5
Q42 - Fire
Prevention & Safety: This program
identifies the common causes of workplace fire
and discusses the importance of good
"housekeeping". It demonstrate the
proper use of a fire extinguisher and explains
evacuation and other employee responsibilities,
including first aid.
1 Part VHS
Tape w/ Presenter's Guide
Poster &
15 Employee Booklets....................$159.00
Order
copies.
Order now
Q45 - Safety
Showers & Eye Wash: This program
describes the types of showers and eye washes,
their operating procedures, and maintenance.
Chemical splashes are also explained.
1 Part VHS
Tape w/ Presenter's Guide
Poster &
15 Employee Booklets....................$159.00
Order
copies.
Order now
Q51 -
Forklift Safety: This program covers
equipment check-out and survey the work area
before forklift use. It discusses correct
operating procedures as well as recognizing
potential problems. Equipment maintenance is also
covered.
1 Part VHS
Tape w/ Presenter's Guide
Poster &
15 Employee Booklets....................$159.00
Order
copies.
Order now
Q52 - Lock
Out / Tag Out: This program is designed
for facilities where maintenance
"set-up" or repairs are being performed
on powered equipment. It covers major compliance
requirements and discusses general Lock-Out /
Tag-Out concepts and procedures. Demonstrations
of locking and tagging powered systems are shown.
(Q52) 1 Part
VHS Tape w/ Presenter's Guide......$229.00
Order
copies.
Order now
(Q52K)
Videotape, Presenter's Guide,
Poster &
15 Employee Booklets..........................$259.00
Order
copies.
Order now
(Q52T)
Compliance Manual................................$120.00
Order
copies.
Order now
Q54
- Bloodborne Pathogens: This program is
for facilities and operation where employees may
be exposed to HBV (Hepatitis), HIV (Aids), and
other bloodborne pathogens. It discusses
bloodborne diseases and presents the Exposure
Control Plan. Emergency procedures are also
explained.
(Q54) 1 Part
VHS Tape w/ Presenter's Guide......$229.00
Order
copies.
Order now
(Q54K)
Videotape, Presenter's Guide,
Poster &
15 Employee Booklets..........................$259.00
Order
copies.
Order now
(Q54T)
Compliance Manual................................$120.00
Order
copies.
Order now
Q56 -
Emergency Planning: assessment and air
monitoring and discusses hygiene and
housekeeping. Personal protective equipment is
also covered.This program explains PELs, TWAs and
Action Levels. This program discusses exposure
(Q56) 1 Part
VHS Tape w/ Presenter's Guide.......$229.00
Order
copies.
Order now
(Q56K)
Videotape, Presenter's Guide,
Poster &
15 Employee Booklets..........................$259.00
Order
copies.
Order now
(Q56T)
Compliance
Manual.................................$120.00
Order
copies.
Order now
Q57 - OSHA
Lead Standards: This program is for
general industry and construction environments
where lead and lead-based materials are found.
This program covers PELs, TWAs, and Action
Levels, plus exposure assessment and air
monitoring. Hygiene, housekeeping and medical
surveillance is discussed.
(Q57) 1 Part
VHS Tape w/ Presenter's Guide.......$229.00
Order
copies.
Order now
(Q57K)
Videotape, Presenter's Guide,
Poster &
15 Employee Booklets...........................$259.00
Order
copies.
Order now
(Q57T)
Compliance
Manual.................................$120.00
Order
copies.
Order now
(Q58) 1 Part
VHS Tape w/ Presenter's Guide........$229.00
Order
copies.
Order now
(Q58K)
Videotape, Presenter's Guide,
Poster &
15 Employee Booklets............................$259.00
Order
copies.
Order now
(Q58T)
Compliance
Manual..................................$159.00
Order
copies.
Order now
Handling
Hazardous Materials - DOT HM -126F
Safety
Training:
(Q59) 1 Part
VHS Tape w/ Presenter's Guide........$229.00
Order
copies.
Order now
(Q59K)
Videotape, Presenter's Guide,
Poster &
15 Employee Booklets............................$259.00
Order
copies.
Order now
(Q59T)
Compliance
Manual..................................$120.00
Order
copies.
Order now
Q62 -
Hazardous Communications: Right-To-Know: This
program is for facilities where employees may be
exposed to potentially hazardous materials. This
program introduces the background of the
regulation, and discusses chemical hazard
concepts and the use of material safety sheets.
(Q62) 1 Part
VHS Tape w/ Presenter's Guide........$229.00
Order
copies.
Order now
(Q62K)
Videotape, Presenter's Guide,
Poster &
15 Employee Booklets............................$259.00
Order
copies.
Order now
(Q62T)
Compliance
Manual..................................$120.00
Order
copies.
Order now
Q63 -
Personal Protective Equipment: This
program discusses the areas of the body needing
protection, describes the vulnerabilities in each
area, and examines available protective equipment
and equipment variations. Matching the equipment
to the hazard and proper use is also presented.
1 Part VHS
Tape w/ Presenter's Guide
Poster &
15 Employee Booklets....................$159.00
Order
copies.
Order now
Q65 - Materials
Handling Safety: This program discusses planning
the job, the potential hazards and personal protective
equipment used for handling certain materials.
Demonstrations are given of proper lifting techniques,
hand truck and cart use.
1 Part VHS
Tape w/ Presenter's Guide
Poster &
15 Employee Booklets....................$159.00
Order
copies.
Order now
Q66 -
Compressed Gas Cylinders: This program
discusses compressed gas hazards, reading hazard
labels and warning signs. Proper moving, handling
and storage of gas cylinders is covered, as well
as proper regulator hook-up procedures.
1 Part VHS
Tape w/ Presenter's Guide
Poster &
15 Employee Booklets....................$159.00
Order
copies.
Order now
Q67 - Safety
Housekeeping & Accident Prevention:
This program covers safety awareness and the
dangers of excess materials and rubbish, electric
cords and ropes, and tools and supplies. This
program covers PELs, TWAs and Action Levels as
well as exposure assessment. The use of hazardous
chemicals and proper personal protective
equipment is discussed.
1 Part VHS
Tape w/ Presenter's Guide
Poster &
15 Employee Booklets....................$159.00
Order
copies.
Order now
Q68 -
Electrical Safety: This program explains
how electricity works, discusses circuit
breakers, outlets, plugs and grounding, and
demonstrates safe work practices. "Lock Out
/ Tag Out" procedures and handling
electrical emergencies are also discussed.
1 Part VHS
Tape w/ Presenter's Guide
Poster &
15 Employee Booklets....................$159.00
Order
copies.
Order now
Tuberculosis:
This program is for facilities and operations
where employees may be exposed to Tuberculosis
infection. This program discusses Tuberculosis as
a decease, its transmission and symptoms, and
recognizing exposure situations. The Exposure
Control Plan, Administrative & Engineering
Controls and respirators and PPE are also
discussed.
(Q80) 1 Part
VHS Tape w/ Presenter's Guide........$229.00
Order
copies.
Order now
(Q80K)
Videotape, Presenter's Guide,
Poster &
15 Employee Booklets............................$259.00
Order
copies.
Order now
(Q80T)
Compliance
Manual..................................$120.00
Order
copies.
Order now
F10 - Reading
A Ruler: This series defines the basic
terminology, how to read a ruler and record
linear measurements. It details how to read
fourths, eighths and sixteenths of an inch using
a fractional inch ruler. This series also
demonstrates how to read centimeters and
millimeters and explains now to record metric
measurements.
4 Part VHS
Series w/ Study Guide...........$149.00
Order
copies.
Order now
ISBN#:
0-8064-1113-9
Both
Video and MPEG CD-ROM............$249.00
Order
copies.
Order now
F11 - Basic
Math: Fractions & Decimals: This
series defines the basic terminology of fractions
and mixed numbers and shows how to reduce
fractions to their simplest form. This series
demonstrates how to find common denominators,
convert mixed numbers to improper fractions, and
add and subtract fractions and mixed numbers.
Demonstrations are also given for the
multiplication and division of fractions and
mixed numbers. The basic concepts of decimals is
defined and demonstrations for adding,
subtracting, multiplying and dividing decimals
are shown. The conversion of fractions to
decimals and to percentages are shown as well as
rounding numbers.
5 Part VHS
Series w/ Study Guide...........$369.00
Order
copies.
Order now
ISBN#:
0-8064-0371-3
Both
Video and MPEG CD-ROM............$469.00
Order
copies.
Order now
F13 - Basic
Math For Electronics: This series
introduces the use of exponents and explores
basic mathematics using scientific notation. This
series explains how to find unknown values such
as resistance, voltage and current and how to
re-arrange formulas to solve unknowns. Kirchoff's
Voltage Law is detailed and descriptions are
given for finding unknown values in both series
and parallel circuits.
4 Part VHS
Series w/ Study Guide...........$289.00
Order
copies.
Order now
T10 -
Transportation Systems Explained: This
series presents the major types of transportation
processes: land, marine and aerospace. The
Universal Systems Model. is also described. Three
basic feedback methods are introduced and the
impacts of various transportation systems on the
environment, the economy and society are
discussed.
6 Part VHS
Series w/ Study Guide..........$429.00
Order
copies.
Order now
T11 -
Manufacturing Systems Technology: This
series defines inputs and explores needs
assessment and product specifications. It
presents the various issues and considerations
for determining resources, and explores four
types of processes and describes forming
procedures. Also, reasons for feedback are
described and the impacts of manufacturing on the
environment, the economy, society and human life.
4 Part VHS
Series w/ Study Guide..........$289.00
Order
copies.
Order now
T12 -
Construction Systems Technology: This
series defines the construction fields as a
system and examines the inputs component. It
introduces seven basic types of resources and
identifies employment opportunities in various
construction fields. This series also outlines
initial stages of building a structure: site
preparation, clearing, grading and accessing
utilities as well as examining structural
foundations, excavation, footings, piers, piles,
poured concrete and cinder block. Detail
procedures for finishing the structure are
highlighted.
5 Part VHS
Series w/ Study Guide.........$369.00
Order
copies.
Order now
T13 -
Introduction To Technology Education:
This series begins by defining technology and
traces technological developments from
prehistoric times to present day. Part 2
delineates seven basic types of resources
required for all systems: people, information,
materials, tools/machines, capital, energy and
time. Procedures are presented for diagramming
and flowcharting, as well as basic technological
problem solving. Lastly, a discussion on how
technology can either solve or create problems
are presented.
5 Part VHS
Series w/ Study Guide........$369.00
Order
copies.
Order now
Both
Video and MPEG CD-ROM............$469.00
Order
copies.
Order now
F53
- Gas Tungsten Arc Welding- This 4 part video series explains the
history and basic concepts of GTAW, explains in detail
the various materials used to make up electrodes as well
as describing how welders prepare the various types of
electrodes and how to strike an arc. Part 3 details the
procedure for puddling or forming a weld pool, running a
bead and explains the use of filler rod to add material
to the weld. Finally, the procedure for welding a lap
joint is demonstrated as well as other various welding
techniques such as tack welds and "walking the
cup".
4 Part VHS
Series w/ Study Guide..........$289.00
Order
copies.
Order now
ISBN#:
0-8064-1592-4
F50 - Welding
Shop Safety: This series describes the
importance of personal safety when using welding
machines and tools, and details specific steps to
avoid eye, skin and foot injuries. It compares
the flow of electricity in an arc welding station
with the flow in a simple electrical circuit, and
explains how to locate and repair hazards to
prevent electrical injuries. This series also
describes the dangers of noxious fumes and smoke,
and shows potential fire hazards, plus introduces
commonly used fire extinguishers and their
specific applications. The proper storage and
handling of oxygen and acetylene cylinders is
shown along with how to properly detect oxygen
and acetylene leaks in an oxy-fuel station.
4 Parts VHS
Series w/ Study Guide.........$289.00
Order
copies.
Order now
ISBN#:
0-8064-
Both
Video and MPEG CD-ROM...............$389.00
Order
copies.
Order now
F51 -
Blueprint Reading Skills Explained: This
series shows the orthographic projection and
sequential presentation of part views, and
defines and identifies the various lines found on
the blueprint. It shows the use of detail and
assembly drawings, and explains the conventional
and baseline methods of print dimensioning,
including the use of datums. The use of the title
and revision box is explained, the meaning of
notes and symbols used on blueprints is detailed,
and the application of scale to the drawing is
shown. Lastly, basic welding symbols are detailed
and the use of those symbols by welders to follow
plans is explained.
4 Parts VHS
Series w/ Study Guide.........$289.00
Order
copies.
Order now
ISBN#:
0-8064-
F52 - Basic
Welding: This series introduces the
basic principles behind Shielded Metal-Arc
Welding(SMAW), Gas Tungsten-Arc Welding(GTAW),
Gas Metal-Arc Welding(GMAW) and Flux Cored-Arc
Welding(FCAW), and underscores the important
safety areas of each. Actual welding techniques
are demonstrated including striking an arc and
maintaining the arc length. The various equipment
types are detailed and the advantages and
disadvantages of each welding type is discussed.
4 Parts VHS
Series w/ Study Guide.........$289.00
Order
copies.
Order now
ISBN#:
0-8064-
F10 - Reading
A Ruler: This series defines the basic
terminology, how to read a ruler and record
linear measurements. It details how to read
fourths, eighths and sixteenths of an inch using
a fractional inch ruler. This series also
demonstrates how to read centimeters and
millimeters and explains now to record metric
measurements.
2 Part VHS
Series w/ Study Guide...........$149.00
Order
copies.
Order now
ISBN#:
0-8064-8
Both
Video and MPEG CD-ROM...............$249.00
Order
copies.
Order now
F11 - Basic
Math: Fractions & Decimals: This
series defines the basic terminology of fractions
and mixed numbers and shows how to reduce
fractions to their simplest form. This series
demonstrates how to find common denominators,
convert mixed numbers to improper fractions, and
add and subtract fractions and mixed numbers.
Demonstrations are also given for the
multiplication and division of fractions and
mixed numbers. The basic concepts of decimals is
defined and demonstrations for adding,
subtracting, multiplying and dividing decimals
are shown. The conversion of fractions to
decimals and to percentages are shown as well as
rounding numbers.
5 Part VHS
Series w/ Study Guide...........$369.00
Order
copies.
Order now
ISBN#:
0-8064-
Both
Video and MPEG CD-ROM...............$469.00
Order
copies.
Order now
W30 - The
Right Angle Counter Top: This series
describes the right angle counter top and
presents a comparison between plywood and
particle board as the base. It demonstrates
step-by-step techniques for attaching and
preparing the wood base. Part 2 details measuring
and layout techniques for working with laminate
and using a laminate cutter. Various techniques
for installing laminate to wood are described,
and procedures for trimming and finished the
laminate counter top are covered.
4 Parts VHS
Series w/ Study Guide..........$289.00
Order
copies.
Order now
ISBN#:
0-8064-
W31 - Kitchen
Cabinet Construction: This series begins
by identifying the qualities of properly
constructed kitchen cabinets and explains the
importance of plans and cut sheet. It examines
how to safely use the table saw and radial arm
saw to make basic cuts as well as special cutting
techniques such as dado, half-lap and lip door,
multi-cutting techniques. It concludes by
highlighting the final assembly of the cabinets
including the installation of spring hinges.
4 Parts VHS
Series w/ Study Guide..........$289.00
Order
copies.
Order now
ISBN#:
0-8064-
If you require expedited delivery services for
business or classroom please inform rectorpress.com of your needs and we will
get back to you with shipment options and pricing.
Your name:
Your email address:
Organization:
Please select a preferred method for contacting you:
email
Postal Mail
phone
Please enter your Postal Mail address, phone
number, or other contact information here:
Order Info
Comments/Questions:
Rector Press Limited Order Agreement
I understand that the fees reflect search,acquisition services,
plus added fees for insured post,all sales being final.
